Vulcanizing Press, Duplex Vulcanizing Press
Model: XLB-D400x400x1/25T
General Introduction of this duplex vulcanizing press:
The machine applies to sulfurizing various kinds of rubber and plastic model products as well as non-model products.
This press is designed with duplex pillar structure which can be operated and used alone or be used and operated together. When using this
set of duplex press, 2 single presses won't influence each other. This plate vulcanizing machine is used in suppressing various kinds of rubber
products, thermosetting plastic products and can also be used as common hydraulic press.
The press has simple structure, flexible operation, capacious space and beautiful appearance etc.
This press mainly consists of host machines, hydraulic system, and electronic control system. Fuel tank is installed on the side of host
machines, won't be affected by the temperature of host machine plates. Workers can operate conveniently with capacious visual. Plate
temperature is controlled by temperature control table, with high precision and good quality of products. All the parts are all according to
ministry of chemical industry standard, using quality materials, with meticulously processed.
Working Process: Under the working hydraulic pressure, the embolism ascends to make hot plate close for getting pressure, while the
embolism descends(namely hot plate turning on) by deadweight of hot plate, platform and embolism to drive working fluid to fuel reserve
tank to achieve the aim of descending (namely turning on).
Made of nodular cast iron, the oil cylinder of machine is improved in compressive strength and wear resistance. Seal ring made of oil-proof
rubber is placed in oil cylinder to have sealing effect in working process of this machine.
Combined oil pump, power source of the machine, provides working fluid with certain pressure. Working fluid enters into oil cylinder by control
valve to make control handle on control valve turn to different places, and then embolism is able to ascend or descend.
Adopting tubular electric-heating component to heat up, the machine can reduce air pollution to keep workshop clean without boiler.
The machine is beautiful in shape, rational in structure, convenient in control, safe as well.
| Parameter/Type |
XLB240×
240×2 |
XLB350×
350×2 |
XLB400×
400×2 |
XLB500×
500×2 |
XLB600×
600×2/4 |
XLB700
×700×2 |
XLB750
×850×2/4 |
XLB900
×900×2Q |
| Total Pressure (MN) |
0.15 |
0.25 |
0.5 |
0.63 |
1.00 |
1.20 |
1.60 |
2.00 |
| Plate Distance (mm) |
125 |
125 |
125 |
125 |
125 |
125 |
200 |
300 |
| Working Layer NO. |
2 |
2 |
2 |
2 |
2-4 |
2 |
2-4 |
2 |
Unit Area Pressure
of Hot Plate(Mpa) |
2.60 |
2.04 |
3.13 |
2.52 |
2.77 |
2.45 |
2.51 |
2.47 |
| Plunger Stroke (mm) |
250 |
250 |
250 |
250 |
250/400 |
250 |
400 |
400 |
| Heating Mode |
Electricity |
Electricity |
Electricity/
Stream |
Electricit/
Stream |
Electricit/
Stream |
Stream |
Electricity/
Stream |
Stream |
| Motor Power (kw) |
2.2 |
2.2 |
2.2 |
2.2 |
2.2 |
2.2 |
3 |
5.5 |
| Size:(L×W×H)(mm) |
1200×350
×1300 |
1400×480
×1380 |
1600×500
×1480 |
1750×600
×1540 |
1880×720
×1680 |
2000×850
×1750 |
2250×1200
×2200 |
1400×900
×2400
(Mainframe) |
Audited Supplier 
){kind=link}
){kind=link}