Equipment for Cold Processing Used Tire Refurbishment Production Line

• Customization: Available
• Warranty: 1 Year
• Control Type: PLC
• Model NO.: tire retreading series
• Automatic Grade: Automatic
• Power Source: Electric
• Type: Tire Recycling Machine
• Heating Mode: Steam/Electric Heating
• Voltage: 380V/50Hz
• Color: Follow Customer′s Requirement
• Name: Equipment for Cold Processing Used Tire Refurbishm
• Transport Package: Wooden Box
• Specification: according to capacity requirement
• Trademark: BORIA
• Origin: China
• HS Code: 8477800000
• Production Capacity: 100 Sets/Year

Product Description

Cold Process Used Tyre Retreading Equipment line


Product Description
Used Tire Cold Retreading Machine,Cold Process Used Tyre Retreading
I. simple introduction
1. Collection of Casings 
Worn tyres are collected to select suitable casings for tyre retread. 
 
2. Initial Inspection 
Each tyre received in a retread plant is subjected to a rigorous visual inspection. Inspectors are assisted by the use of non-destructive sophisticated MELION inspection machine. 
 
3. Buffing After inspection
The tyre's old tread is mechanically removed on high speed buffers. MELION's buffers are extremely accurate and will remove the proper amount of old rubber while turning the tyre to an exact specified diameter and radius. 
 
4. Section Repairs & Skiving 
With advances in state-of-the-art repair materials and repair methods, many of these tyres can be routinely repaired and in most cases can be retreaded when the original tread is worn off. The repair station is where any surface injury is treated using effective material and tools for grinding and patching.
 
5. Cementing and Filling 
Even in small injuries it is critical that the injury is cleaned and filled. If this is not done, severe rust, separation and steel cable looseness could take tyre out of service. The injury should be inspected, and then cleaned out with a carbide cutter. After cementing the injury, a vulcanizing rubber stem should be applied to "fill" the injury. This would create a permanent repair that maximizes tyre life.
 
With MELION designed-and-built spray booth, your cementing operation can be executed in a clean, efficient & environmentally responsible manner.
 
6. Building - Tread Rubber
In the pre-cure system, the tread rubber has already been vulcanized with the new tread pattern design. The buffed tyre needs a thin layer of cushion gum to be wrapped around its crown area. The pre-cured tread rubber is then applied with the building machine. This is called the building process.
 
7.a) Enveloping & Rim Mounting  
 The built tyres are then mounted with envelops and rims to prepare them for curing. 
   b) or Double Envelope System
For enveloping, tyres are first fitted an outer envelope at the envelope-mounting table before the inner envelope is fitted into them. The enveloped tyres are then vacuumed out for preparation prior to curing. Modern plants have their casings hoisted by monorail systems. With professional planning from MELION engineers, you can be assured of workstations designed to maximize output and ease workflow. 
 
8. Curing by Chamber 
 The tyre is then placed in a curing chamber and the pre-cured tread becomes adhered to the tyre through a vulcanizing process.
 
Our wide engineering capabilities and experience enable MELION to build chambers to suit our clients' different preferences for size, steam heated, electric heated, or double heating system, semi-automatic and automatic chambers.
 
9. Final Inspection & Painting
The retreaded tyre is subjected to a final inspection. This inspection insures that only tyres that meet industry quality standards are allowed to leave the retread plant. All retreaded tyres are encouraged to be returned with the sidewalls painted using a light coat of black tyre paint. 

Product Parameters

1.Curing Chamber

Name	Size(Diameter*length)	Quantity of tire
	DN1500*1500	4 tires
	DN1500*2000	6 tires
	DN1500*3000	8 tires
	DN1500*3500	10 tires
	DN1500*4000	12 tires
	DN1500*5000	16 tires
Function	The tyre is then placed in a curing chamber and the pre-cured tread becomes adhered to the tyre through a vulcanizing process.
Power	30kw-90kw
Heating Method	Electrical heating, thermal oil heating, steam heating

 2.Inflatable Tire Buffing Machine 

Name	Inflatable Contouring Grinding Machine/Buffing Machine
model	FXM-C
Scope of Application	15",16",20",22.5"
Dimension	1920x2150x1850
Weight	1550KG
Technical parameter	(1) grinding head motor power: 11KW
	(2) Rotation tire matching power: 2.2kw
	(3) Left-to-Right Limits Control Motor Power: 0.55KW
	(4) ront-to-Rear Limits Control Motor Power: 0.37KW
Function	(1) For tire tread surface radian grinding
	(2) Engineered with tire shoulder side Buffer and tire explosion-proof function

 3. Tread Building Machine

Name	Inflatable Tread Press/Tread Building Machine
model	TBM-22.5
Scope of Application	15",16",20",22.5"
Dimension	1770x2000x2010mm
Weight	900KG
Technical parameter	(1) Working Pressure: 0.6Mpa
	(2) Inflation Pressure: 0.15Mpa
	(3) Roller Motor Power: RV63-0.55KW
	(4) Chuck Plate Type: 15,16,20,22.5
Function	(1) To press the new tread applied on old casing
	(2)mainly consists of Frame, Tread Press Motor, Tire Ejecting Motor, Air Cylinders, Pneumatic Components, Vacuum Chuck Plate and Electric Control Panel.

4.Envelope disassembly machine

name	Envelope disassembly machine
model	LJJ-A
specification	15",16",20",22.5"
Outline size	2.2x1.5x1.6M
weight	350KG
Function	For envelope disassembly before and after tire vulcanization, applicable to many kinds of tire

5. Rim Dismounting Machine

Name	Rim Dismounting Machine
model	JZJ-22.5
specification	15",16",20", 22.5"
Outline size	1.5x1.3x0.8M
Weight	100KG
Function	For disassembling of rim

 6.Outer Envelope Mounting Machine

name	Outer Enveloper
model	BZJ-22.5
specification	15",16",20",22.5"
Outline size	2.2x1.5x1.6M
weight	350KG
Function	For envelope disassembly before and after tire vulcanization, applicable to many kinds of tire

Detailed Photos

Packaging & Shipping

Packing method: Remove the motor and rotary joint, and pack the main body in an integrated manner. A small cabinet.

Company Profile

Qingdao Boria Machinery Manufacturing Co., Ltd is recapitalized combination from Qingdao Bojia Machinery Manufacturing Co., Ltd in 2016. And Qingdao Bojia Machinery Manufacturing Co., Ltd.
changed officially its name from a state-owned machinery company in October 2007, is one professional machinery manufacturer. Our company    have one good and high quality design and manufacturing technology development group, often communicate with the customers and technology authority departments of rubber industry, constantly to improve and update our products which can meet requirements of the customers.Our company guarantee to provide you excellent pre-marketsale and after-sale service, timely technology information consulting, accessories and consumable parts supply etc, also can design & manufacture various non-standard products according to users' requirements.  
Our main products are: Vulcanizing Press Series; Batch Off  Cooling Machine Series;Open Mixing Mill Series; Rubber Cutting Machine Series; Rubber    Slitting Machine Series; Longitudinal Cutting Machine Series; Cushion Cloth  Renovating Machine Series; Conveying Belt Molding Machine Series;       Conveyor Belt Machine Series; Other Rubber Machines; Design and manufacturing of Automatic Production Line.

Our Advantages

Qingdao Boria Machinery is a professional machinery manufacturing enterprises, the company has all kinds of CNC precision machining equipment, processing power is strong; with independent professional rubber machinery design R & D team, and with China's long history of the most professional four One of the major rubber industry institutions, "Qingdao Institute of Chemical Technology" long-term rubber technology, formula, machinery and equipment, and other aspects of technology, practice and cooperation; Qingdao Boca machinery can be based on customer needs and customer technical parameters for equipment design and Ratio. At the same time the company focused on the automation of equipment research and development, manufacturing lines can be unmanned design, improve the user's labor productivity, reduce the labor intensity of workers, and stabilize product quality.




 

FAQ

1.Delivery time of the rubber machines?
This is specially designed machine according to your specific requirement.
 From engineer designing to production completion, it needs about 25 to 35 days.
 
2. What does your factory do regarding quality control?
 We pay much more importance to quality control from the very beginning to the end of production.
 Every machine will be fully assembled and carefully tested before shipment.
 
3. What's the machine quality guarantee?
Quality guarantee time is one year.We choose world famous brand components to keep our machine in perfect working condition.
 
4. Are you able to give installation and commissioning overseas? How long time will it take?
Yes, we can supply overseas service and technical support but customer needs to pay for the cost of the installation.
 Small machine usually takes within 2~3 days.
 Big plant usually takes about 30 days.
 
5. How can I trust you to deliver the right machine as I ordered?
We will absolutely deliver a good quality machine as we discussed and confirmed in the order.
The core of our company culture is innovation, quality, integrity and efficiency. Also we have had much good cooperation with world famous rubber production manufacturers. If you come to our factory, we can show you're the user around us.
 
6. How can we go to your side?
We are located in Qingdao City, Shandong province, China. The name of airport is Qingdao Liuting airport.
We will pick up you at the airport.

If you have more information to learn, please send us a private message and we will provide you with the highest quality service.